Removing Air Inlets; Fig. 27: Removing Air Inlets - ABB HT578566 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.3 Removing air inlets
8.3

Removing air inlets

Mark the casing position for assembly.
u
Fig. 27: Removing air inlets
1. Attach lifting gear to the filter silencer (81000) or air suction branch (82000).
2. Loosen and remove V-clamp (72020).
3. Remove filter silencer (81000) or air suction branch (82000), set it down properly in an
appropriate place and secure it.
4. Remove and dispose of the O-ring (81010 / 82010).
© Copyright 2017 ABB. All rights reserved. HZTL4030_EN Revision D May 2017