Download
Share
Print this page
Honeywell Crestron Home T9 Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Thermostat
  5. T9
  6. Manual

Honeywell Crestron Home T9 Manual

Hide thumbs Also See for Crestron Home T9:

Advertisement

Quick Links

Download this manual
Honeywell Thermostats
Crestron Home™ Driver
Model: T9
Base
Type: Platform Extensions
Device
Version: 1.2.0
Notes & Recommendations
This driver will control a Honeywell T-series thermostat (examples include but are not
limited to T5, T6 Pro, T9, and T10). The thermostat will have to be paired with the
Honeywell Home app first. Please refer to the instruction manual for the thermostat
that you have for thermostat setup instructions. This driver talks to the thermostat with
the cloud so an active internet connection will be necessary. In addition, a (free)
Honeywell developer account will need to be registered in order to properly set up this
driver. A developer account is needed because of access limitations imposed by
Honeywell. The owner will also have to make available the thermostats for Crestron
control through a web browser (explained later). The driver will poll for feedback from
Honeywell's server approximately every 5 minutes. This is a restriction set by
Honeywell.
System Requirements and dependencies
Versions of software used:
Crestron Home 3.013
●
Active internet connection to the processor
●
Honeywell developer account (https://developer.honeywellhome.com/)
●
Homeowner's Honeywell Home credentials for authorizing thermostats
●
This driver comes with a 2-hour trial license. You can purchase a full license at (add
product link from the store)
For additional information on this driver please visit the FAQs section on our website
(Add product FAQ section link)
www.digitalautomation.us
Visit us at

Advertisement

loading

Related Manuals for Honeywell Crestron Home T9

Summary of Contents for Honeywell Crestron Home T9

  • Page 1 In addition, a (free) Honeywell developer account will need to be registered in order to properly set up this driver. A developer account is needed because of access limitations imposed by Honeywell.

  • Page 2: Installation/Upgrade Instructions

    Installation/Upgrade Instructions The first step is to make sure the thermostat is paired with the Honeywell Home app on a phone/tablet. Once the thermostat(s) are paired, create a Honeywell developer account(https://developer.honeywellhome.com/). Once the developer account has been created, log in and go to My Apps > Create New App. The App Name can be anything you want and for the Callback URL.
  • Page 3 You will next need to generate an authorization code. Open a web browser and put in the URL, replacing { } with values specific values: https://api.honeywell.com/oauth2/authorize?response_type=code&client_id={apikey} &redirect_uri={redirectUri} Replace {apikey} with the Consumer Key that you wrote down earlier and replace {redirectUri} with none.
  • Page 4 Have the user/homeowner log in and press the button to allow access. Select all the thermostats that you/they want Crestron to have access to. www.digitalautomation.us Visit us at...
  • Page 5 Press connect and you will be redirected to a “not found - error” page. Look at the URL and copy down the authorization code (after the code= but before the &). You will need to enter this authorization code into the driver. www.digitalautomation.us Visit us at...

  • Page 6: Install The Driver

    Install the Driver Install the CH driver (Drivers > Platform > Honeywell 1-Select Platform 2-Select “Honeywell” 3-Add driver to Room 4-Add a name for the Thermostat www.digitalautomation.us Visit us at...
  • Page 7 Secret that you copied down previously. Put in the name of the location (found in the Honeywell Home app, case matters). The location name is available in the Honeywell Home app, this name should be added to the “Location Name?” field.
  • Page 8 After finishing filling the fields select OK, the system will query and create a folder with all the thermostats that have been made available for control. Add each one to the appropriate room. www.digitalautomation.us Visit us at...
  • Page 9 End-User Experience www.digitalautomation.us Visit us at...

  • Page 10: Supported Features

    Known Issues Feedback polling is limited to every 5 minutes, as per Honeywell’s API requirements Thermostats paired to Honeywell’s Total Connect Comfort (TCC) are not supported If you select the option to have the tile show on the CH home page, you will not get the temperature.

  • Page 11: Contact Information

    Test Environment The following hardware was used for testing: Crestron hardware: CP4R - firmware v2.7000.00074 Crestron Home (processor) 3.013.0179 TSW - firmware 1.006.0046 Android - 1.23.1+tr iOS - 1.21.15 Supported Models T6 Pro T10 Pro Lyric Round Contact Information If you have any questions please contact us at drivers@digitalautomation.us www.digitalautomation.us Visit us at...
  • Page 12 Version History 1.0.0 06/10/2022 Changes since the Last Version New Features ● Initial release 1.1.0 06/10/2022 Changes since the Last Version New Features ● Updates to schedule mode sent with the system and set points command. 1.2.0 06/7/2022 Changes since the Last Version New Features ●...
  • Page 13 Licensing and Copyright Information All product names, logos, brands, trademarks, and registered trademarks are the property of their respective owners. All company, product, and service names used in this manual are for identification purposes only. Use of these names, trademarks, and brands do not imply endorsement.