Using The Show Interface Stats Command; Using The Show Ip Interface Command - Cisco NPE-175 Installation And Configuration Manual

Enabling the Second Processor on the NPE-G1

Using the show interface stats Command

Use the show interface stats command for information about the interface.
Router# show interface stats
GigabitEthernet0/1
Multi-Processor Fwding

Using the show ip interface Command

Use the show ip interface command to get information about the specific interface port.
Router# show ip interface g0/3
GigabitEthernet0/3 is up, line protocol is up
Internet address is 155.1.1.1/16
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP CEF switching is enabled
IP Feature Fast switching turbo vector
IP VPN Flow CEF switching turbo vector
IP multicast fast switching is enabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Policy routing is enabled, using route map PBR
Network address translation is disabled
BGP Policy Mapping is disabled
IP Multi-Processor Forwarding is enabled
IP Input features, "PBR",
are not supported by MPF and are IGNORED
IP Output features, "NetFlow",
are not supported by MPF and are IGNORED
Network Processing Engine and Network Services Engine Installation and Configuration
7-48
Switching path Pkts In
Processor 33090
Route cache
1004
Total 34096
Chapter 7 NPE-G1 and NPE-G2 Installation and Configuration Information
Chars In Pkts Out
6424353 86353
2 116 0
158632 5004
6583101 91357
Chars Out
8645650
0
790632
9436282
OL-4448-12