Cisco OL-10426-01 User Manual page 108

NMT Map Startup
Figure 8-1
Figure10-2 shows an example of the physical network corresponding to Figure 10-1. The physical nodes
are shown as squares and the links between them as lines.
If multiple groups are defined and a link has ends in two different groups, the nodes at each end are called
border nodes. The NMT Map highlights border nodes by displaying them as striped squares. The NMT
Map also displays links in two-line thickness. A thin line indicates that there is only one trunk between
the end points; a thick line indicates multiple trunks. Figure 11-2 shows an example of all these display
features.
Figure 8-2
Cisco WAN Modeling Tools Guide
8-2
Network View Showing Logical Nodes
Network View Showing Physical Nodes
Chapter 8 NMT Map
OL-10426-01, Rev. A0