Operating Instructions - Black & Decker BAPUV250 Manual

SET UP & USE

OPERATING INSTRUCTIONS

Before using the air purifier for the first time, remove all packaging material, including
the plastic bag the filter is wrapped in.
NOTE: Refer to CLEANING AND MAINTENANCE section of this manual for
information on how to access and install the filter.
Place the air purifier on a firm, level surface, making sure nothing is obstructing the
airflow on any side of the air purifier.
Plug the power cord into a 120V AC electrical outlet. The POWER
illuminate in red. Touch POWER to turn ON the air purifier. It will illuminate blue and
the air purification speed will default to AUTO mode.
WARNING: Do not run the unit without the filters in place.
CONTROL PANEL
Power
Speed
(fan speed defaults
to AUTO; SLEEP
mode defaults to
low fan level)
Filter change indicator
According to the actual use of the filter, the machine automatically calculates
the expiration time of the filter. After filter expires, the replacement indicator is
flickering and reminding to change the filter.
CAUTION: Please turn off the power and pull out the power plug before
replacing the filter.
Page 8
UV Sterilization
Mode
Air quality indicator
Digital display area
light will
Change filter indicator
F
Anion Timer
Child lock
(press for 5 seconds to un-lock)
Reset
(press for 5
seconds)