Troubleshooting & Warranty - Black & Decker BAPUV250 Manual

TROUBLESHOOTING & WARRANTY
Troubleshoot your problem by using the chart below. If the air purifier still does not
work properly, contact BLACK+DECKER customer service center or the nearest
authorized service center.
WARNING: Users must never troubleshoot internal components.
TROUBLE
Appliance does not
turn on
The Air Purifier is not
operating
The air purification is
poor
Air purifier is noisy
The REPLACE FILTER
light is still illuminated
after replacing the filter
Air quality indicator on
AUTO mode is always
red
SPECIFICATIONS
• Voltage: 120V, 60Hz
• Unit Dimensions (W x D x H): 18.2" x 10.55'' x 21.96"
• Net Weight: Approx. 28.6 lbs
Page 16
POSSIBLE CAUSE
Appliance is not plugged in
There may be a connection
problem
The appliance may be in
standby mode
Something is obstructing the
fan
There is not enough clearance
around the air purifier
Air Purifier is set at a low
speed setting
The filters may need to be
replaced
The air purifier is being used
in a larger room than it is
intended for
Something may be
obstructing the fan or an
object may be inside the air
purifier
The plastic packaging may not
have been removed from the
filter
The filters were not installed
correctly or the filters were not
reset by touching and holding
the button for 5 seconds
There is a source of pollution
near the air purifier such as
someone is smoking
The sensor may be clogged
with dust or other debris
POSSIBLE REMEDY
Check that the appliance is properly
plugged into a working outlet
Check that the appliance is properly
plugged into a working outlet
Touch the POWER button
Remove the packing material
including the plastic bags the filters
are packed in. Make sure nothing is
obstructing the airflow around the air
purifier
Make sure nothing is obstructing the
airflow around the air purifier
Set at a higher speed setting
Replace Filters
Move the air purifier to a smaller room
Remove any foreign objects from the
air purifier
Remove the plastic packaging from
the filters
Make sure the filters were installed
properly with the plastic bags
removed. After installing the filters,
touch and hold the
seconds
After operating the air purifier for
a period of time, the air quality
indicator will turn blue when the air
quality improves
Wipe the sensor and make sure there
is no dust or debris obstructing it
button for 5