Using Your Juicer - Sharp SA-FJ3001W Operation Manual

Using Your Juicer

1. Power switch settings are:
I Switch juicer on
0 Switch juicer off
R Reverse rotation. Hold the button to clear clogs.
2. Make sure both juice and pulp containers are placed in position.
3. For best results cut food into smaller pieces. For example, the carrots shall be cut into
thin slices with size of 15mm×15mm before being put into the machine.
NOTE:
- Remove stones (plums, peaches, mango, apricot, cherries etc.)
- Peel off though skins (melons, pineapples, cucumbers, potatoes etc.)
- Do not process coconuts, sugarcane or similar hard food, to avoid motor damage.
- It is not recommended to process hard fruit or vegetable rich in fiber and starch. Drop
food into feed tube on the juicing jar lid. Do not push or force down. Insert food at a slow
pace, allowing the pulp to extract. For maximum efficiency, don't overload or rush.
Note: The food pusher should be used if food becomes stuck in the feeding tube.
5. Plug in the juicer and switch to "I" position to commence juice extraction.
Caution: DO NOT switch directly from "I" to "R" nor "R" to "I" at any time during
operation. If required, always switch off the juicer by switching to "O" position. Once
juicer stop working, select "I" or "R".
Caution: Do not use the juicer without food inside.
Caution: Never put your fingers or other objects into feeding tube than food intended to
use with slow juicer when it is working. Unplug before unblocking the feed tube.
6. Slow juicer is equipped in safety device to
prevent motor damages.
If the juicer is stuck and don't work:
- switch off "0" the juicer
- reset the juicer by pressing the reset switch
underneath the motor unit.
- after reset switch and hold reverse "R" position
EN-7
Reset
Reset switch
switch
Fig.6