Philips GC3600 Series Manual page 17

Problem Possible cause
You have set a too
low temperature
for steam ironing.
Water drips You have put the
from the iron in horizontal
soleplate position with water
after the still left in the
water tank.
iron has
cooled
down or
has been
stored.
Flakes and Hard water forms
impurities flakes inside the
come out of soleplate.
the
soleplate
during
ironing.
The red The
auto- automatic shut-off
off light function has
flashes switched off the
(specific iron (see chapter
types only). 'Features').
Solution
Set an ironing temperature that is
suitable for steam ironing ( 2 to
MAX). Put the iron on its heel and
wait until the temperature light
goes out before you start ironing
Empty the water tank before you
store the iron. Store the iron on its
heel.
Use the Calc-Clean function one
or more times (see chapter
'Cleaning and maintenance',
section 'Calc-Clean function').
Move the iron slightly to deactivate
the automatic shut-off function.
The red auto-off light goes out.
EnGliSh
17