Verifying The Package Contents; Mounting The Cisco Unified Videoconferencing 3500 Gateway Unit In A 19-Inch Rack - Cisco 3522 BRI Installation And Upgrade Manual

Chapter 2 Setting Up Your Cisco Unified Videoconferencing 3500 Gateway
•
•

Verifying the Package Contents

Procedure
Inspect the contents of the box for shipping damage.
Step 1
Report any damage or missing items to your Cisco representative.
Step 2
Verify contents.
Step 3
Videoconferencing 3500 Gateway unit.
Table 2-4
Product
Cisco Unified
Videoconferencing 3527 PRI Gateway or
Cisco Unified
Videoconferencing 3522 BRI Gateway unit
Mounting the Cisco Unified Videoconferencing 3500 Gateway
Unit in a 19-inch Rack
You can optionally mount the Cisco Unified Videoconferencing 3500 Gateway unit in a standard
19-inch rack. Two mounting brackets and a set of screws are included in the Cisco Unified
Videoconferencing 3500 Gateway unit shipping box.
Procedure
Step 1 Disconnect all cables including the power cables.
Step 2 Place the Cisco Unified Videoconferencing 3500 Gateway unit right-side up on a hard flat surface, with
the front panel facing you.
Position a mounting bracket over the mounting holes on each side of the Cisco Unified
Step 3
Videoconferencing 3500 Gateway unit, as shown in
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway Releases 5.6 and 5.7
OL-17010-01
Key Hold
ACO
SeeTable 2-4 lists the package contents for the Cisco Unified
Package Contents with Cisco Unified Videoconferencing 3500 Gateway Unit
Contents
Cisco Unified Videoconferencing 3500 Gateway
•
Unit
Guide to Cisco Conferencing Documentation
•
Regulatory Compliance and Safety Information for
•
Cisco Unified Videoconferencing 3500 Products
Cisco Unified Videoconferencing Software
•
CD-ROM
• Cisco Information Package
Figure 2-4.
Verifying the Package Contents
2-5