Table of Contents
Advertisement
COLOR
With the button you can select Light, Medium or Dark color for the crust. This button is not applicable for some
programs. The details referring to the corresponding program are described in above section "MENU".
LOAF/SIZE
Press this button to select the size of the bread: 700g, 900g. When you select the desired size, the LCD will
display the corresponding size. Please note the total operation time may vary with the different loaf size. This
button is not applicable for some programs. The details referring to the corresponding program are described
in above section "MENU".
TIME
If you want the appliance not to start working immediately, you can use the button to set the delay time.
The steps to set delay function is as follows:
1) Select your Menu, Color, Loaf/Size.
2) Set the delay time by pressing TIME button. The delay time should include the operation time of chosen
menu. Suppose it is 8:30PM now and you want the bread ready to serve at 7:00AM of next day, so the
delay time should be 10 hours and 30 minutes. Press TIME button continuously until 10:30 appear on the
display. The increment of each press is 10 minutes. Press and hold the TIME button, the time will be
advanced rapidly at a rate of 60min/s. The maximum delay time is 13 hours.
3) Press the START/STOP button to activate this delay program. You can see the dot flashes and LCD will
count down to show the remaining time.
NOTE: For the time delayed baking, do not use any easily perishable ingredients such as eggs, fresh milk,
fruits, onions, etc.
06
KEEP WARM
Bread can be automatically kept warm for 1 hour after baking. During keeping warm, if you would like to take
the bread out, switch the program off by pressing the START/STOP button. After baking, the LCD displays
"0:00" and beeps will be heard. Then go back to the default setting of the machine.
NOTE: The programs of Dough and Jam do not have the function to keep warm.
MEMORY
If the power supply has been interrupted during the course of making bread, the process of making bread will
be continued automatically within 10 minutes, even without pressing START/STOP button. If the interruption
time exceeds 10 minutes, the memory cannot be kept, you must discard the ingredients in the bread pan and
add the ingredients into bread pan again, and the bread maker must be restarted. But if the dough has not
entered the rising phase when the power supply breaks off, you can press the START/STOP directly to
continue the program from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperature, but there may be some difference in loaf size
between a very warm room and a very cold room. We suggest that the room temperature should be within the
range of 15℃ to 34℃.
WARNING DISPLAY
1. If the display shows "HHH" after you have pressed START/STOP button, 5 beeps will be heard,
it prompts that the temperature inside is still too high. And the program will not be performed.
Open the lid and let the machine cool down for 10 to 20 minutes.
2. If the display shows "LLL" after you have pressed START/STOP button, 5 beeps will be heard,
it means that the temperature inside of bread pan is too low. The bread maker shall be placed into
environment of higher temperature for use (Except the program of Bake).
3. If the display shows "EE0" after you have pressed START/STOP button, beeps will be heard,
it means the temperature sensor open circuit, press START/STOP button to stop beeps sound,
but the "EE0" in the LCD will continue flashing, please check the sensor carefully with an authorized expert.
If the display shows "EE1", it means the temperature sensor short circuited.
BEFORE THE FIRST USE
The appliance may emit a little smoke and a specific smell when you turn it on for the first time. This is
normal and will soon stop. Make sure the appliance has sufficient ventilation.
1. Please check whether all parts and accessories are complete and free of damage.
2. Clean all the parts according to the section "Cleaning and Maintenance".
3. Set the bread maker on Bake mode and bake empty for about 10 minutes. Then let it cool down and
clean all the detached parts again.
4. Dry all parts thoroughly and assemble them, the appliance is ready for using.
07
Advertisement
Table of Contents
