Table of Contents
Advertisement
1.3 Label wires
Do not label by wire color.
Use the supplied sticky tags to label
each wire as you disconnect it. Label
wires according to old thermostat
terminal designations, not by wire
color.
Note:
If no tag matches a terminal
designation, write the appropriate
letter on a blank sticky tag.
Note:
Wrap the wires around a pencil
to prevent them from falling back into
the wall.
1.4 Remove wallplate
Remove the old wallplate from
the wall after all wires are
labeled and disconnected.
C
5
firealarmresources.com
Sticky tag
Blank tags
MCR31537
Terminal
designation
Advertisement
Table of Contents
