1.7.1
1.7.2
© Copyright 2015 ABB. All rights reserved.
Preliminary remarks
Turbocharger rating plate
Explanation of the rating plate
The recommended replacement intervals and the corresponding
operational limits are jointly defined with the engine manufacturer. This
information is specific to the system.
Operation above the indicated values n
recommended replacement intervals. In such cases, we recommend that you
contact the nearest official ABB Turbocharging service station.
n
and t
normally apply only when running at overload (110%) during
Mmax
Mmax
trials on the engine test bed. These limits can also be permitted during operation
for special applications. Operation above n
Non-observance of the recommended replacement intervals can increase the
risk of unpredictable component failures.
Positions of the rating plates
A rating plate (1) is attached to the left and right-hand sides of the
turbocharger bearing casing.
Operation Manual / TPS48-D/E.. - TPS61-D/E..
1
1.7
, t
can considerably shorten the
Bmax
Bmax
and t
Mmax
Page 15
is not permitted.
Mmax