Print Applications - Canon S530D Quick Start Manual

3

Print Applications

You can set the type of paper and layout to be used in printing, the number of print copies,
photograph correction, quality, and dated printing. Set these settings after you set the print
mode (Index, All Frames, Single Frame, Specified Frame, and DPOF).
Setting the Number of Print Copies (Copies)
Copies allows you to set the number of copies in Single Frame mode.
Notes
• Copies cannot be set in Index, All Frames, or Specified Frame mode.
• For DPOF mode, set Copies from the digital camera.
• Copies allows you to specify the number of copies for one photograph. The number of
required sheets differs depending on the setting in Layout. For example, if eight copies
in Copies and four patterns in one sheet in Layout are specified, two sheets are needed
to print.
Setting the Media Type (Media Type)
You can select the paper for printing from the following seven types:
<PR-101>
40
1
2
3
<PC-101S>
Set Single Frame mode.
See "Printing Photographs One at a Time (Single
Frame Printing)" on page 35.
Move the (cursor) to Copies by
press the (top) and
buttons.
Up to 99 copies can be set.
Set the number of copies by press the
(left) and
(bottom)
(right) buttons.