Canon S530D Quick Start Manual page 19

7
After the pattern is printed, click Yes.
If the pattern is not printed successfully, open the
front cover and ensure that the ink tanks are
correctly installed.
8
Look at the print-out. From the patterns
in Column A, select the most even,
least irregular pattern and enter the
number.
9
In the same way, one by one, select
the most even patterns printed with the
least irregularities from each of
Columns B to F, enter their numbers,
and click OK.
If it is difficult to pick the best pattern on Column
F, pick the setting that produces the least
noticeable vertical white stripes.
Less noticeable
white stripes
10
Click OK.
This completes the printer setup. The printer is
now ready to use.
Note
Before turning off the power
If you are using Windows XP or Windows
2000, the computer recognizes the printer as a
removable disk that is connected with a USB.
Therefore, to turn off the printer while you are
using the computer, you must perform the
hardware removal operation on the computer.
See the Windows user's guide for the removal
operation.
More noticeable
white stripes
17