2 Set Up the Machine
4
Make sure the following screen is displayed on
the display, then press [OK] to proceed to the
"Setup Guide. "
If the machine does not get the IP address, subnet mask and
gateway address, each of the screen displays
"000.000.000.000. "
5
Make sure the following screen is displayed on
the display, then press [OK] to proceed to the
"Setup Guide. "
See "Network Settings, " in the e-Manual.
34
6
Make sure the following screen is displayed on
the display.
Go to "Finish 'Setup Guide' , " on p. 35.
If there are any unestablished items, a screen appears before
this screen listing the unestablished items.