Configuring The Camera; Power Saving Function - Canon PowerShot SX10 IS User Manual

Configuring the Camera

Power Saving Function

This camera is equipped with a power saving function, which can
automatically turn off the power or LCD monitor (or the viewfinder).
Auto Power Down When set to [On], the power will shut off in the
Display Off
1
Select [Power Saving].
1. Press the MENU button.
2. Use the
menu.
3. Use the
[Power Saving].
4. Press the
2
Make settings.
1. Use the
option.
2. Use the
settings.
3. Press the MENU button.
following circumstances. Press the power button again
to restore power.
Shooting mode: Approximately 3 minutes after the last
control is accessed on the camera.
Playback mode or when connected to a printer:
Approximately 5 minutes after the last control is
accessed on the camera.
In shooting mode, the LCD monitor (or the viewfinder)
automatically turns off after the selected time if no
control is accessed, regardless of the [Auto Power
Down] setting. Press any button other than the power
button or change the camera orientation to turn the
LCD monitor (or the viewfinder) back on.
or button to select the
or button to select
button.
or button to select an
or button to make
211