Saving Original Images - Canon PowerShot SX10 IS User Manual

148

Saving Original Images

Not only can you save images with altered colors when shooting still
images with the Color Accent or Color Swap modes, but you can
also choose to save the original images (before the color change).
1
Select [Save Original].
1. Press the MENU button.
2. In the
button to select [Save Original].
2
Make settings.
1. Use the
[On] or [Off].
2. Press the MENU button.
You cannot save the originals of still images taken while
shooting a movie in Color Accent or Color Swap mode.
If [Save Original] is set to [On]
- The transformed image is reviewed in the LCD monitor (or
the viewfinder) after shooting in the Color Accent or Color
Swap mode. If you erase the image at this point, the
original image is erased along with the transformed image.
Exercise adequate caution before deleting a file.
- Since two images are recorded with each shot, the number
of shots remaining is approximately half the number
displayed in the LCD monitor (or the viewfinder) when this
function is set to [Off].
- The images are numbered consecutively. The original
images are assigned the lower number and the
transformed color accent or color swap images the next
number.
menu, use the
or button to select
or