Canon VB-C50FSi User Manual page 116

Schedule Setting Tool
6. Enter the settings for output to an external
device when the device detects motion
(Output tab).
* The settings in this step are optional.
Set output to an external device when the device has
detected motion (ON event) or when the device has
finished detecting motion (OFF event).
q Output to External Devices 1-3
Check for Output to External Devices 1-3.
w Output duration after OFF event (sec.)
When the camera is outputting data to an external device and output has to continue after the camera
detects an OFF event, use this option to set a duration between 0 and 20 seconds for which output
continues.
7. Set Audio Playback when the device detects
motion (VB-C50FSi only) (Audio/Tracking
tab).
* The settings in this step are optional.
Set Audio Playback when the device detects motion
(ON event) or when the device has finished detecting
motion (OFF event).
q Playback at ON event
Check for audio playback when the device detects motion
(ON event).
w Playback at OFF event
Check for audio playback when the device has finished detecting motion (OFF event).
Sound Clip and Volume
Set the audio for playback. Select from the registered sound clip names. Set the volume at which the
audio is to be played back, between 1 and 100.
For registering and deleting audio files, see "Audio Playback Settings dialog box" (→
P.4-57).
Tip
4-44
○ ○ ○ ○ ○ ○ ○ ○ ○
Continued on the following page. a
q
w
q
w