Bosch Professional GBG 35-15 Original Instructions Manual page 15

Products that are only sold in AUS and NZ: Use a resid-
u
ual current device (RCD) with a nominal residual current
of 30 mA or less.
Switching On and Off
– To start the power tool, push the on/off switch (8) into
position "I".
– To switch off the power tool, push the on/off switch (8)
into position "0".
Working Advice
Switch the power tool on before bringing the work-
u
piece into contact with it and only switch the power
tool off after you have removed the workpiece. The
workpiece can move suddenly.
Never reach into the power tool grinding wheel when
u
it is running. This can lead to serious injuries.
Wear a work apron. Ensure that no persons are at risk
u
due to flying sparks. Remove combustible materials
from the surrounding area. Flying sparks are created
when sanding metals.
Use silicon carbide grinding discs C (accessory) when work-
ing carbide (TC) workpieces.
– Place the workpiece you intend to grind onto the work-
piece support (12) and press it lightly against the grind-
ing wheel. To achieve optimal grinding results, move the
workpiece gently back and forth. This also ensures that
the grinding wheel is worn off evenly.
– Cool off the workpiece in water at intervals.
Transport
– Remove all accessories that cannot be securely fitted to
the power tool.
– Wind up the network cable completely and tie it together.
– To lift or transport the power tool, hold it from below by
the two protective guards (6). You can support the power
tool in the area of the holes for mounting (7).
Never use the spark arrestor (11) or workpiece sup-
u
port (12) when transporting the power tool.
Maintenance and Service
Maintenance and Cleaning
Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
Bosch Power Tools
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), power tools that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.
English | 15
1 609 92A 7Y2 | (31.05.2022)