Placing Documents; Configuring The Scanning Method - Canon imageFORMULA P-215 Reference Manual

0-00-P-215_RG_EN.book Page 11 Wednesday, August 24, 2011 11:45 AM

4. Placing Documents

Fan the pages before placing them.
Press the document beneath the tabs.
You can place up to 20 sheets at one time.
Do not go past the mark on the document
guides.
Scannable Documents
Width: 50.8 mm to 216 mm (2" to 8.5")
Length: 70 mm to 356 mm (2.756" to 14")
2
Thickness: 52 to 128 g/m (14 to 34 lb bond) 0.06 mm to 0.15 mm
(0.0024" to 0.0059")
Depending on the document, scanning may result in a paper jam
or malfunction. For details, refer to the User Manual.

5. Configuring the Scanning Method

Place the scanning side of
the documents face down
into the scanner.
Adjust the document
guides to the edges of the
documents.
Place the top of the
documents pointing down.
(with page edges slightly
A If you want to scan a multi-page document in batches, click [ON] for
askew)
[Enable continuous scanning]. This manual describes scanning
operations with this set to [OFF]. For details on operations with this
set to [ON], refer to the User Manual stored on the supplied Setup
disc.
B If you want to configure scanning conditions, click [OFF] for [Scans
in the full auto mode]. (See p. 12)
11