Qualified Personnel - Bosch Rexroth BOS 6000 User Manual

20 Bosch Rexrot h GmbH |
Electric Drives
and Controls
Safety Instruction s
Qualif ied pe rso nnel
The present documentation is designed for specifically trained
engineers with special knowledge of the welding technology. They
must have sound knowledge of the software and hardware
components of the weld timers, the power units used, and the
welding transformers.
Project engineering, programming, start and operation as well as
the modification of program parameters is reserved to properly
trained personnel! This personnel must be able to judge potential
hazards arising from programming, program changes and in
general from the mechanical, electrical, or electronic equipment.
Such personnel are
those who, being well trained and experienced in their field and
•
familiar with the relevant norms, are able to analyze the jobs
being carried out and recognize any hazards which may have
arisen
those who have acquired the same amount of expert knowledge
•
through years of experience that would normally be acquired
through formal technical training.
Risks for person s with c ardiac pa cemake rs!
Due to the strong magnetic fields
resistance welding,
DANGER pacemakers may be disturbed. This may cause the
death or considerable health damages!
Therefore, these persons should avoid the welding
system.
Please note our comprehensive range of training courses. Please
refer to http://www.boschrexroth.com
training courses, teachware and training systems.
Our Erbach Didactic Center will be pleased to provide you with
further information,
telephone: (+49) (0) 60 62 78 600.
BOS 6000 | 1070087074 / 01
arising from
the function of cardiac
for the latest information on