System Features; Account Code Entry - Panasonic KX-TD816JT Features Manual

1.3 System Features

Account Code Entry

Description
An Account Code is used to identify incoming and outgoing outside calls for accounting and
billing purposes. The account code is appended to the Station Message Detail Recording
(SMDR) call record. For incoming outside calls, account codes are optional. For outgoing
outside calls, there are three modes available to enter an account code as follows. One mode is
selected for each extension on a Class of Service basis. <[508] Account Code Entry Mode>
Mode Type
Verified-All Calls
Verified-Toll
Restriction Override
Option
Conditions
• An account code can be stored into Memory Dialling (System / Station Speed Dialling;
One-Touch Dialling; Pickup Dialling; Call Forwarding – to Outside Line).
• The Account button may be used in place of the feature number. A flexible button on the
proprietary telephone set can be programmed as the Account button. <[005] Flexible CO
Button Assignment>
• Account code entry after receiving a disconnection signal from an outside line must be done
within 15 seconds. Otherwise, SMDR call record is activated and entry becomes impossible
afterwards.
• If disconnection signal is selected <[990] System Additional Information, Area 01-Bit3>
and Flash function is enabled <[990] System Additional Information, Area 02-Bit5>, the
Verified-All Calls extension is allowed to make an outside call using the same line with
Flash function.
Features Guide
Description
The user must always enter a pre-assigned account
code when making any of the following calls unless it
has previously been stored in memory.
• Call Forwarding – to Outside Line
• Last Number Redial
• One-Touch Dialling
• Outside Line Access
• Pickup Dialling
• Saved Number Redial
• Station Speed Dialling
• System Speed Dialling
The user can enter a pre-assigned account code only
when the user needs to override toll restriction.
The user can enter any account code if needed.
1.3 System Features
17