Table of Contents
Advertisement
00995G-VR345-XAA-Eng1-13
Before Reading the
User's Manual
Make sure to check the following terms before reading
the user's manual.
Icons that will be used in manual
Icon
Term
DVD
RAM
-RW
-R
+RW
+R
CD
JPEG
MP3
MPEG4
Caution
NOTE
One-Touch A function that can be operated
button
ANYKEY A function that can be operated
button
About the use of this user's manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~5)
2) If a problem occurs, check the Troubleshooting.
(See pages 98~100)
2006.4.10
2:49 PM
Definition
This involves a function available
in DVD or DVD-R/DVD-RW(V)/+R
discs that have been recorded
and finalized.
This involves a function available
in DVD-RAM.
This involves a function available
in DVD-RW.
This involves a function available
in DVD-R.
This involves a function available
in DVD+RW.
This involves a function available
in DVD+R.
This involves a function available
in a data CD (CD-R or CD-RW).
This involves a JPEG function
available in CD-R/-RW or
DVD±R/±RW/-RAM discs.
This involves an MP3 function
available in CD-R/-RW or
DVD±R/±RW/-RAM discs.
This involves an MPEG4
function available in
DVD±R/±RW/-RAM discs.
This involves a case where a
function does not operate or
settings may be cancelled.
This involves tips or instructions
on the page that help each
function operate.
by using only one button.
by using ANYKEY button.
Page 9
Copyright
©2006 Samsung Electronics Co.
All rights reserved; No part or whole of this user's
manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
How to use the DVD
Recorder & VCR
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD±RW or DVD-RAM type disc. If you
want to save a recording without any changes,
choose a non-rewritable DVD±R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts format-
ting when an unused disc is inserted. This is required
for the preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
images and create a playlist in a specific sequence
according to your requirements.
Using a DVD±RW/+R
•
When an unused DVD±RW/+R disc is first inserted,
the message "Uninitialized Disc. Do you want to ini-
tialize this disc?" will be displayed.
If you select Yes, initializing will be start. DVD-RW
discs can be formatted in either DVD-Video format
(Video mode) or DVD-Video Recording format (VR
mode)
•
With DVD+RW discs, there is no difference between
DVD-Video format (Video mode) and DVD-Video
Recording format (VR mode).
Using a DVD-R
Initializing disc is unnecessary and only V mode
Recording is supported.You can play this type of disc
on various DVD components only when they have
been finalized.
You can only use either the VR or Video mode
s
on a DVD-RW, but not both at the same time.
Note
You can format a DVD-RW to V or VR mode
s
using disc manager.
It should be noted that the disc's data will be
lost when changing formats.
English - 9
Advertisement
Table of Contents
