Step 4 : Connecting Hdmi/Dvi To A Tv; Connecting To A Tv With Hdmi Jack - Samsung DVD-VR345 Instruction Manual

00995G-VR345-XAA-Eng14-30

Step 4 : Connecting HDMI/DVI to a TV

Connecting to a TV with HDMI Jack

Using an HDMI- HDMI cable(not included) connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI
IN jack of your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV
screen.
To hear audio on your TV when using HDMI, set the
s
digital audio output to PCM (2 channel).(See page 37)
Caution
Depending on the HDMI device(TV/HDMI Receiver)
s
you use, audio may not be supported. If TV does
not support Dolby digital/DTS, Audio output is not
available when you set Digital output as Bitstream
or select DTS On in Audio setup menu. In this case,
set the digital audio output to PCM or DTS Off.
24 - English
2006.4.10 2:50 PM Page 24