HIKVISION DS-K1A802A Series Quick Start Manual

DS-K1A802A Series
Fingerprint Time Attendance Terminal
Quick Start Guide
UD15388B-B
©2020 Hangzhou Hikvision Digital Technology Co., Ltd.
It includes instructions on how to use the Product. The software embodied in the Product is
governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision
Digital Technology Co., Ltd. ("Hikvision") reserves all rights to this manual. This manual cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are registered
trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other
trademarks mentioned in this manual are the properties of their respective owners. No right of
license is given to use such trademarks without express permission.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognition features, biometrics data is stored in your device with encryption
method; for fingerprint device, only fingerprint template will be saved, which is impossible to
reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative and
physical security controls, conduct periodic reviews and assessments of the effectiveness of your
security controls.
1
Appearance
Fingerprint
Screen Recognition Area
155 mm
28 mm
Keypad Card Presenting Area
Front View Side View
2
Installation
Method 1:
Wall Mounting
without
Mounting Plate
1. Drill 4 holes on the wall or other places
according to the mounting template. (Supplied)
Note: The length and width will be 2 to 3 mm
smaller than the actual device's.
68.1 mm
Method 2: 36.5 mm
Wall Mounting
66.6 mm
with
Mounting Plate
3
2
Mounting
Device
Power Network
Interface Interface
Exiting Key
ESC
Direction
Keys
2
1
ABC
4 5
GHI JKL
Numeric Keys/
7 8
Letter Keys
PQRS TUV
USB Interface Debugging
Port
Back View Keypad
152 mm
2. Insert the screw sockets of the setscrews in the drilled
holes.
3. Fix and fasten the screws in the sockets on the wall or
other places. (You should reserve 5.2 mm to 5.5 mm for
the hanging the device when fix and fasten the screws.)
120 mm
1
4
Gang
Plate Box Wall
Keypad Descriptions
OK Key: Press the key and confirm operations. Hold the key
for 2 s to enter the login interface.
OK Key
Deleting Key: Press the key to delete the entered letter or
number.
If the device supports connecting lithium battery, long press
the key to power off the device.
OK
Deleting
3
Key
DEF
6
MNO
9
0
WXYZ
Editing Key: Press the key to enter the editing status.
Editing Key
You can shift among numbers/lowercases, numbers/uppercases
and symbols.
Notes:
1. The pictures here are for reference only. Some models do not support
card presenting function. For details, refer to the actual products.
2. If the attendance mode is Manual, the OK key, the direction
key, and the exiting key can be the shortcut key of the attendance status.
4. Align the 4 holes on the device plate with
the fixed screws and hang the device on the
wall.
Steps:
1. Install the gang box on the wall.
Note:
Make sure the gang box screw holes match the mounting plate's.
•
The gang box here is for reference only. Select an appropriate gang box to
•
install.
The gang box is not supplied.
•
2. Fix the mounting plate on the gang box with 2 supplied screws
(SC-PM4X10-IMP).
3. Route the device cable through the cable hole of the mounting plate and
insert the cables in the gang box.
4. Align the terminal with the mounting plate, and secure the terminal on
4 the mounting plate with two supplied socket hexagon screws
(SC-KM3X10_3-SUS).