Black & Decker BDT20WTB Instruction Manual page 12

SET UP & USE
CONTINUOUS DRAINAGE
Water can be automatically emptied by attaching the clear hose (included)
or a standard garden hose (not included) to the drain port on the back of the
dehumidifier. This will allow the unit to run continuously (depending on the
selected humidity level) without having to empty the unit's water collection
bucket.
To use with clear hose (included)
1. Place dehumidifier on a perfectly level surface.
2. Unscrew and remove drain cap to access the garden hose nozzle threads.
(See fig. 7)
3. Insert the included gasket into the front of the included drain adapter
(see fig. 8).
4. Force the included clear hose on to the drain adapter (see fig. 9).
5. Turn drain adapter clockwise on to the nozzle thread on the back of the unit
(see fig. 9).
6. Once securely installed, lead the drain hose to a nearby drain lower than the
height of the drain plug. (Make sure there are no kinks or knots in the hose)
7. Turn on the unit and select desired relative humidity level.
Fig. 7
Drain Adaptor
Page 12 Page 12
Fig. 8
Gasket
Drain Hose 16.4 feet (5 meters)
Fig. 9