Basic Operations; Setting The Clock - JVC NX-DD30 Instructions Manual

Compact component md system
Table of Contents

Advertisement

Basic Operations

Preparation/Basic Operations
This manual explains the operations assuming that
you will use the remote control. Some buttons on
the main unit are the same as those on the remote
control. You can use either button in this case.
CAUTION
• Set the remote control mode selector to
AUDIO before using the number buttons.

Setting the Clock

You can set the clock while the main unit is turned
either on or off.
Example: To set the clock to 10:10 a.m.
1
Press
.
2
Set the hour.
or
Back
Next
Back Next
• Holding down the button causes the hour to
increment.
• You can use the number buttons to specify
the hour.
Refer to "Using the number buttons" shown
below.
Using the number buttons
Set the remote control mode selector to
AUDIO before using the number buttons.
To select 1-10: Press the corresponding
number button.
To select 11+: Press +10 and another
number button.
Examples:
3:
13:
20:
23:
3
Press
.
• To return to step 2, press
4
Set the minute in the same manner
as steps 2 and 3.
Adjusting the clock
Press
five times to display the clock, and
then adjust the clock starting from step 2.
Displaying the clock while using the
main unit
Press
repeatedly.
NOTE
• The time display on the main unit is a 24-hour
clock.
• The clock will gain or lose approximately 1 minute
per month.
• Set the clock again after you have disconnected
the power plug or a power cut has occurred.
.
18

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Ca-nxdd30Sp-nxdd30

Table of Contents