Timer; Cooking Time; End Time - Bosch HBA43B251B Instruction Manual

Timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
Press the button once.
0
1.
The time symbols light up in the display and the brackets are
around .
U
Use the or button to set the timer duration.
@ A
2.
Default value for button = 10 minutes
@
Default value for button = 5 minutes
A
After a few seconds, the time setting is adopted. The timer
starts. The [ U ] symbol lights up in the display and the timer
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 00:00 is shown in the display. Use the
button to switch off the timer.
Changing the timer duration
Use the or button to change the timer duration. After a few
@ A
seconds, the change is adopted.
Cancelling the timer duration
Use the button to reset the timer duration to 00:00. The
A
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the U timer, r
clock, press the 0 button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.

Cooking time

The cooking time for your dish can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the picture: cooking time 45 minutes.
Use the function selector to set the type of heating.
1.
Set the temperature or grill setting using the temperature
2.
selector.
Press the button twice.
0
3.
00:00 is shown in the display. The time symbols light up and
the brackets are around
cooking time, p end time or
r .
Use the @ or
4.
Default value for
Default value for
The oven will start up after a few seconds. The cooking time
counts down in the display and the [
other time symbols go out.
0
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
using the or
@
the function selector to the off position. The oven switches off.
Changing the cooking time
Use the or
@ A
seconds, the change is adopted. If the timer has been set,
press the button beforehand.
0
Cancelling the cooking time
Use the button to reset the cooking time to 00:00. After a few
A
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
0
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
clock, press the
around the relevant symbol. The display shows the value for a
few seconds.

End time

You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the
0
3.
Use the or
@
4.
A button to set the cooking time.
button = 30 minutes
@
button = 10 minutes
A
] symbol lights up. The
r
button. You can set a new cooking time
0
button. Or press the
A 0
button to change the cooking time. After a few
U timer, r cooking time,
button repeatedly until the brackets are
0
button twice.
button to set the cooking time.
A
button twice and turn
button
0
p end time or 0
9