Table of Contents
Advertisement
Setting the time-setting options in brief
Press the
button to open the menu.
0
1.
Set the desired function by turning the rotary selector.
2.
Press the
button to change line and turn the rotary
X
3.
selector to set the time or cooking time.
Press the
0
button to close the menu.
4.
A detailed description of how to adjust each individual function
is provided below.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
Press the
button.
0
1.
The time-setting options menu appears.
Press the
button and set the timer run time using the
X
2.
rotary selector.
Press the
button to close the time-setting options menu.
0
3.
The display returns to its previous state. The
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
U
00:00. You can cancel the signal earlier by pressing the
button.
Cancelling the timer time
Press the
0
button to open the time-setting options menu.
Press the
button and use the rotary selector to turn the time
X
back to 00:00. Press the
0
Changing the timer time
Press the
0
button to open the time-setting options menu.
Press the
button and in the next few seconds change the
X
timer time by turning the rotary selector. Press the
close the menu.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: top/bottom heating setting, 180 °C,
cooking time of 45 minutes
Press the
button.
0
1.
The time-setting options menu appears.
7LPHVHWWLQJ RSWLRQV
7LPHU
PLQ VHF
([LW ZLWK
Switch to the cooking time by turning the rotary selector.
2.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
PLQ VHF
([LW ZLWK
Press the
button to change line.
X
3.
U
symbol for the
button to close the menu.
0
button to
Turn the rotary selector to set the cooking time.
4.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
PLQ VHF
([LW ZLWK
Press the
button.
0
5.
The time-setting options menu closes.
If the operation has not yet started, press the
6.
can see the cooking time counting down in the status bar.
7LPH VHWWLQJV
7RSERWWRP KHDWLQJ
ƒ&
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
0
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
0
Cancelling the cooking time
Press the
button to open the menu. Use the rotary selector
0
to switch to the cooking time, press the
cooking time to 00:00 by turning the rotary selector. Press
the
button to close the menu.
0
Changing the cooking time
Press the
button to open the menu. Use the rotary selector
0
to switch to the cooking time, press the
the cooking time by turning the rotary selector. Press the
button to close the menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
all types of heating and all dishes from the recommended
■
settings
a variety of programmes
■
and for self-cleaning
■
Example: you put the dish in the cooking compartment at 9.30 .
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Setting a later end time
Prerequisite: The selected operation has not already begun and
a cooking time has been set. The
is open.
button.
X
button and set the
button and change
X
0
time-setting options menu
n
button. You
0
11
Advertisement
Table of Contents
