Philips RL4-H Installation Instructions

100 Craftway, P.O. Box 128
Littlestown, Pennsylvania 17340-0128
The following lamps may
be used in this fixture:
20W T3 Halogen Bi-pin (included)
10W T3 Halogen Bi-pin
5W T3 Halogen Bi-pin
NOTE : FIXTURE STYLE MAY VARY WITH FIXTURE OPTIONS.
This fixture is intended for installation in accordance with the National Electrical Code and local code
specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage
to the ballast and void the warranty. These instructions do not purport to cover all details or variations in
equipment, nor to provide for every possible contingency related to installation, operation, maintenance,
or mounting situation. Should specific problems occur that are not addressed by these instructions, contact
your Sales Representative or distributor for assistance. Retain these instructions for future reference.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE OR INJURY TO PERSONS-IMPORTANT SAFETY INSTRUCTIONS
Lighted lamp is HOT! WARNING- To reduce the risk of FIRE OR INJURY TO PERSONS: Turn off/unplug and
allow to cool before replacing lamp. Lamp gets HOT quickly! Contact only switch/plug when turning on.
Do not touch hot lens, guard, or enclosure (see diagram/picture). Keep lamp away from materials that
may burn. Do not touch the lamp at any time. Use a soft cloth. Oil from skin may damage lamp. Do not
operate the luminaire fitting with a missing or damaged shield. SAVE THESE INSTRUCTIONS.
Xenon lamps do not require additional shielding.
32001019, revision I
INSTALLATION INSTRUCTIONS:
LARGE SPREADLIGHT
ROOF
12" STEM
RELAMPING SCREW
FIXTURE BASE
1/2-14 NPS FITTER
page 1 of 2