Table of Contents
Advertisement
Starting a programme with delay start
1. Set a programme.
2. Press
to delay the start of the programme
by 3 hours.
The light related to the button is on.
3. Press
to start the countdown.
The light related to the button is on.
During the countdown, it is not possible to change
the programme.
When the countdown is complete, the programme
starts.
Cancelling the programme
Press and hold
until the light related to the
button starts to flash.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
Cancelling the delay start while the
countdown operates
1. Press and hold
the button starts to flash.
2. Press
to start the programme.
Opening the door while the appliance
operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
HINTS AND TIPS
GENERAL
Follow the hints below to ensure optimal cleaning
and drying results in daily use and to protect the
environment.
•
Washing dishes in the dishwasher as instructed
in the user manual usually consumes less water
and energy than washing dishes by hand.
•
Load the dishwasher to its full capacity to save
water and energy. For best cleaning results,
arrange items in the baskets as instructed in the
user manual and do not overload the baskets.
•
Do not pre-rinse dishes by hand. It increases
the water and energy consumption. When
needed, select a programme with a prewash
phase.
•
Remove larger residues of food from the dishes
and empty cups and glasses before putting
them inside the appliance.
•
Soak or slightly scour cookware with firmly
cooked-on or baked-on food before washing it
in the appliance.
until the light related to
consumption and the programme duration. After
closing the door, the appliance continues from the
point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it as this may
cause damage to the appliance.
If, afterwards, the door is closed for at
least 3 minutes, the running
programme ends.
The Auto Off function
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
•
When the programme is complete.
•
After 5 minutes if a programme was not started.
End of the programme
When the programme is complete, the Auto Off
function switches the appliance off.
Close the water tap.
•
Make sure that items in the baskets do not
touch or cover each other. Only then can the
water completely reach and wash the dishes.
•
You can use dishwasher detergent, rinse aid
and salt separately or you can use the multi-
tablets (e.g. ''All in 1''). Follow the instructions
on the packaging.
•
Select a programme according to the type of
load and the degree of soil.
most efficient use of water and energy
consumption.
•
To prevent limescale buildup inside the
appliance:
– Refill the salt container whenever
necessary.
– Use the recommended dosage of the
detergent and rinse aid.
– Make sure that the current level of the water
softener agrees with the hardness of the
water supply.
– Follow the instructions in the chapter "Care
and cleaning".
offers the
13
Advertisement
Table of Contents
