Honeywell Dolphin CT40HC User Manual page 86

The hotspot on the server device will be named HONEYWELL_WIFI_STAGING.
Note: We recommend starting the server before setting any clients because the clients
require more time and power to scan and search for the hotspot signal if the server is
not created in advance.
Note: To control bandwidth usage, the server side of Wi-Fi Staging has a maximum
limitation of 10 concurrent client connections. If more than 10 client devices attempt
to connect to the server device at the same time, staging of some of those clients will
be delayed until client connections become available as the staging process
progresses.
Basic Configuration
Basic configuration includes the most common system settings.
1. Launch the Wi-Fi Staging app on the server device by tapping Settings >
2. Tap Basic Configs to start the configuration wizard.
3. System language: Tap
4. Connection preferences: Enable Bluetooth and/or NFC. They are disabled by
5. Sound preferences: Adjust the default volume for each type of audio by
6. Location setting: Enable the location switch. It is disabled by default. Tap
7. Network & Internet: You have the option to set up a network connection if, for
8. Files & Apks: (This option will not display if you chose to skip the network
76
Honeywell Settings > Wi-Fi Staging.
selected. Tap NEXT.
default. Tap NEXT.
dragging the slider, then tap NEXT.
NEXT.
example, you want to register devices to an MDM system or the devices need to
use applications that require network access.
If you do not want to set up a network connection, tap SKIP and proceed to Step
9.
If you want to set up devices to connect to a Wi-Fi access point, enter the
network information:
a. Tap Wi-Fi Security and select either OPEN or WPA/WPA2.
b. Enter the Wi-Fi SSID. This field cannot be empty. Then tap OK.
c. Enter the Wi-Fi password. The password must be between 8 and 63
characters long. If you selected WPA/WPA2 a password is required.
d. Tap NEXT.
settings in Step 7.) Enter the locations (URLs) of the files to be downloaded. The
URL should end with the file that you want to download. Wi-Fi Staging will
name the downloaded file with the file name in the URL.
• For security, only Local Area Network URLs are supported. Wi-Fi Staging will
ignore URLs from Wide Area Networks.
to add a language. At least one language must be
Dolphin CT40 Mobile Computer