The Scanner Cannot Be Powered On - Fujitsu SP-1130Ne Operator's Manual

The Scanner Cannot Be Powered ON

Check the following points
● Is the power cable connected properly? (page 94)
● Did you press the power button on the scanner? (page 94)
If the problem still persists, check each item in
114) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Is the power cable connected properly?
Solution
Connect the power cable properly.
For details, refer to the diagram of the connection procedure for
(When Obtaining an IP Address Automatically) (page
Assigning an IP Address Manually) (page
Cable (page 27).
●
Did you press the power button on the scanner?
Solution
Press the power button on the scanner.
For details, refer to
23), or
How to Turn the Power ON (page
94
Before You Contact the Scanner Service Provider (page
Connecting the Scanner via a Wired LAN
20), Connecting the Scanner via a Wired LAN (When
Connecting the Scanner to the Computer via the USB
29).
Troubleshooting