Mobile Phone Read Mode - Honeywell Xenon 1500 User Manual

Scan Presentation Centering On, then scan one of the following bar
codes to change the top, bottom, left, or right of the centering window.
Then scan the percent you want to shift the centering window using digits
on the inside back cover of this manual. Scan Save. Default Presentation
Centering = 40% for Top and Left, 60% for Bottom and Right.
Presentation Centering On
Top of Presentation Centering
Window
Left of
Presentation Centering
Window

Mobile Phone Read Mode

When this mode is selected, your scanner is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed
bar codes may be slightly lower when this mode is enabled. You can enable
Mobile Phone Reading for either a hand held device, or for a hands-free (pre-
sentation) application.
Note: To turn off Mobil Phone Read Mode, scan a Manual or Serial Trigger
Mode bar code (see page 3-5).
Hand Held Scanning - Mobile
Phone
* Presentation Centering Off
Bottom of Presentation
Centering Window
Right of Presentation Centering
Window
3 - 9