Advertisement
2. INSTALLATION INSTRUCTIONS
Important!
The appliance must be installed by a qualified engineer in compliance with
the relevant regulations.
The washer-dryer is heavy. Take care when lifting it.
2.1 UNPACKING
The unit on flexible mounts is fixed in place for transport using the screws (A)
on the rear of the washer-dryer, with the relative plastic spacers (B). Once the
screws have been removed, the power supply lead can be used.
1. Undo all the screws with a 10 mm spanner
2. Remove all the screws (A) from the rear
3. Remove all the plastic spacers (B)
A
WARNING:
the supplied plastic plugs (C) in order to avoid
splashes or water penetrating the machine or to
avoid contact with live parts.
Warning!
Do not turn the appliance upside-down or place it on its sides.
All the transport retainer fittings should be kept in a safe place; they must be
fitted again if the appliance has to be moved around in the future.
A+B
It is absolutely necessary to fit all (nr.5)
B
EN
C
7
Advertisement
