Changing Metadata Server Settings; Changing Clip Server Settings; Changing Streaming Settings; Managing The Network Connection Settings File A - JVC GY-HM660E Instructions Manual

D Settings on the [Select Setup Type] Screen
.
E Settings on the [IP Address Configuration]
Screen
When "DHCP" is selected, all items will be
grayed out.
.
F Settings when using cellular adapter
G Settings on the [Select FTP Proxy] Screen
H [OK]/[Cancel] Button
After changing of settings is complete, tap
(click) the [OK] button.
On the confirmation screen, tap (click)
[Execute] to change the settings on the camera
recorder and restart the network.
172

Changing Metadata Server Settings

You can make direct changes to the FTP server for
importing the metadata set in [Main Menu] B
[System] B [Network]/[Settings] B [Metadata
Server], as well as the path of the file to import.
(A P125 [ Metadata Server ] )
E

Changing Clip Server Settings

You can make direct changes to the server and
directory settings that are specified in [Main
Menu] B [System] B [Network]/[Settings] B [Clip
Server] for uploading recorded clips in the SD card
to the FTP server.
(A P126 [ Clip Server ] )

Changing Streaming Settings

You can make direct changes to settings that are
specified in [Main Menu] B [System] B [Network]/
[Settings] B [Live Streaming Set], such as
information on the destination of distribution.
(A P122 [ Live Streaming Set ] )
F
Managing the Network
Connection Settings File
a
G
This camera recorder allows you to save the
network connection settings on the Wizard screen
to the camera recorder unit.
H
Loading a saved connecting settings file enables
you to reproduce the appropriate network
connection state speedily.
Memo :
To save or load the connection settings, go to
0
[Main Menu] B [System] B [Network]/[Settings]
B [Connection Setup].
The following operations can be performed on
0
the [Connection Setup] menu.
Number of Storable Setup Files
Camera recorder
[Saving the Connection Settings File]
0
(A P 173)
[Reading the Connection Settings File]
0
(A P 174)
[Deleting Connection Settings] (A P 174)
0
: [CAM1] to [CAM4]