Configuration2 Menu - ViewSonic CDE5010 User Manual

Boot on source
Choose to select source when boot up. Input:
select input source when boot up.
Playlist: select playlist index for Media player,
Browser, PDF player.
0: no play list. Same as switch source from
OSD.1~7: playlist number. No failover function,
system will keep source even the source is no
signal input.
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}
Configuration1 reset
Reset all settings in Configuration1
factory preset values.
Factory reset
Reset all settings in the OSD menus of
{Picture}, {Screen}, {Audio}, {Configuration1},
{Configuration2}, and
factor y preset values.
Android settings will also reset when factory reset.
Press [ ] or [ ] button to select {Reset}, and
press [OK] button to do the reset.
Factory reset
Factory reset
CANCEL
CANCEL

6.1.5. Configuration2 menu

Picture OSD turn off
Picture OSD turn off
Screen OSD H position
Screen OSD H position
Audio OSD V position
Audio OSD V position
Configuration 1 Information OSD
Configuration 1 Information OSD
Configuration 2 Logo
Configuration 2 Factory reset Logo
Advanced option Monitor ID
Advanced option Monitor ID
Heat status
Heat status
Monitor information
Monitor information
HDMI Version
CANCEL
HDMI Version
Configuration2 reset
Configuration2 reset
OSD turn off
Set the period of time the OSD (on-screen
Picture OSD turn off
Screen OSD H position
display) menu stays on the screen.
Audio OSD V position
The options are: {Off, 5 ~
Configuration 1 Information OSD
Configuration 2 Logo
*{0ff} does not disappear automatically.
Advanced option Monitor ID
Heat status
Monitor information
HDMI Version
Configuration2 reset
menu to the
{Advanced option} to the
Reset
Reset
45
45
50
50
50
50
10
10
On
On
Action
Action
24.21°C 75.57°F
24.21°C 75.57°F
Action
Action
Reset
Action
Action
45
50
50
120} seconds.
10
On
Action
24.21°C 75.57°F
Action
Action
OSD H-position
Adjust the horizontal position of the OSD menu.
Information OSD
Set the period of time the information OSD is
displayed on the upper right corner of the screen.
The information OSD will display when input signal
is changed.
The information OSD will remain on the screen
with {Off} selection. The options are:
seconds.
Logo
Choose to enable or disable the picture of Logo
when turn on your display.
The options are:
• {Off}
• {On} (Default)
• {User}
1. If Logo set to ON, both scalar ViewSonic logo
and android animation ViewSonic logo will
show.
2. If Log set to OFF, neither scalar ViewSonic logo
nor android animation logo will not show.
3. If Logo set to USER, custom logo option in
android is not set, then there will be no boot
logo when power on.
4. If Logo set to USER, custom logo option in
android is set, there will be only custom logo
when power up.
* Logo will NOT rotate with rotation setting/
Monitor ID
Monitor ID
detection.
Monitor ID
Monitor ID
Monitor group
Monitor group
Monitor ID
Set the ID number for controlling the display via
the RS232C connection. Each display must have
a unique ID number when multiple sets of this
display are connected. Monitor ID number range is
between 1 to 255.
1 2
1 2
The option are: {Monitor group}
Monitor ID
5 6
5 6
Monitor ID
Monitor group
9 10
9 10
13 14
13 14
1 2
5 6
Monitor information
Monitor information
9 10
Model name
34 Model name
Serial NO.
Serial NO.
{1 ~ 60}
1
1
1
1
3 4
3 4
7 8
7 8
1
1
11 12
11 12
15 16
15 16
3 4
7 8
11 12
CDE5010
CDE5010
N/A
N/A