Custom App; Osd Menu Operation; Set Custom App - ViewSonic CDE5010 User Manual

Select "Sort" in the slidebar, you can change the
order of files one by one.
3. Select {Settings} on this page, this page
has two parts, {Repeat
Duration}.
• {Repeat Mode} : play mode.
• {Effect Duration} : photo effect duration.
4.7.

Custom App

User can set up the application for Customer
Source
Note:
(1) Only display User Installed app.
(2) Will not show up system pre-install app.

4.7.1. OSD Menu operation:

Press SOURCE button and select Custom.
If set up customer APK, PD will open customer
app when switch source to Customer mode.
If no set up customer APK, PD will show Black
screen when switch source to Customer mode.

4.7.2. Set Custom App

Select custom app from source setting.
1. Entry Signage Display in Admin Mode (Refer
section 4.7 & 4.7.3)
Mode} and {Effect
2. Select Custom app will show the installed APK.
CDE model pre-install the vCastReceiver APK
inside.
3. Press Select App to show the APK list.
4. Select vCastReceiver and press Save.
5. vCastReceiver APK name will show on Select
App.
6. Exit admin mode and press custom input
source. vCastReceiver will run on screen.
17