Honeywell HomMed Genesis Programming And Troubleshooting Manual page 25

# VFD Display
617 MODEM NOT READY
901 RAM_ERROR
902 ROM_ERROR
903 UART_ERROR
904 RTCC_ERROR
910 ERROR_FILE_SYSTEM
911 DISK_ERROR
912 DISK_ERROR_BAD_FORMAT
913 DISK_ERROR_NO_CARD
914 DISK_ERROR_BAD_CARD
915 DISK_ERROR_CHANGED_CARD
916 DISK_ERROR_CARD_FAILURE
930 PHOTOCARD TIMEOUT
931 PHOTOCARD FAILURE
932 PHOTOCARD READ ERROR
933 PHOTOCARD CONFIG BAD
934 PHOTOCARD PAT. ID BAD
935 PHOTO NOT FOUND
P4520EN.04
GENESIS
Programming/Troubleshooting Guide
Meaning
Modem was not ready.
RAM self test failed
ROM Checksum error
Hardware error
Real time clock failure
Language text files missing
or corrupt
SmartMedia failure
SmartMedia failure – bad
format
SmartMedia failure – card
removed
SmartMedia failure – bad
card
SmartMedia failure – card
swapped
SmartMedia failure – card
failure
Card removed before monitor
No response – card
could download images.
removed or defective
Defective card
Card not readable:
damaged, wrong type
Invalid CRC, parity error,
etc.
Config. file (*.CFG) missing
or contains invalid info
Pt. ID file (*.PAT) missing or
contains invalid info
No photos in photo
directory
07/14/2010
DM MONITOR
TM
Possible Cause
If problem persists, call
Honeywell HomMed.
Call Honeywell HomMed.
Call Honeywell HomMed.
Call Honeywell HomMed.
Call Honeywell HomMed.
Replace the SmartMedia card.
Replace the SmartMedia card.
Replace the SmartMedia card.
Insert the correct SmartMedia
card.
Replace the SmartMedia card.
Reboot the unit; if problem
persists, call Honeywell HomMed.
Replace SmartMedia card; if
problem persists, call Honeywell
HomMed.
Retrain the patient.
Use new card, retake photo,
resend.
Use only SmartMedia cards for
digital images.
Use new card, retake photo,
resend.
Take another picture and resend.
Use new card, retake photo,
resend.
Use only appropriate SmartMedia
cards for digital images.
Use new card, retake photo, and
resend.
Use new card, retake photo, and
resend.
Take pictures and resend.
Resolution/Action
25