Preparing The Camcorder; Attaching The Lens Hood - Canon LEGRIA HF G60 Instruction Manual

Preparing the Camcorder

Preparing the Camcorder
This section covers basic preparations for the camcorder such as attaching the lens hood, adjusting the
viewfinder and LCD screen, and adjusting the grip belt.
20
IMPORTANT
• Be careful not to drop the camcorder when attaching, removing or adjusting the various accessories. Using a
table or other stable surface is recommended.

Attaching the Lens Hood

While recording, the supplied lens hood with lens barrier is
effective for reducing stray light that can be the cause of lens
flare and ghost images. Additionally, closing the lens barrier
can help prevent fingerprints and dirt accumulation on the
lens.
1 Remove the lens cap.
2 Align the groove on the lens hood with the index
mark on the top of the lens ( ), and then turn the
lens hood clockwise until it stops with a click
• Be careful not to deform the lens hood.
• Make sure that the lens hood is aligned with the thread.
To remove the lens hood
1 Press and hold the lens hood release button and turn
the lens hood counterclockwise.
2 Place the lens cap back on the lens.
NOTES
About the lens cap:
• Use the supplied lens cap when carrying the camcorder or storing it after use.
• The lens cap and lens hood cannot be used simultaneously. To attach the lens hood, remove the lens cap in
advance.
( ) .
Lens hood release
button