Other Error Messages - Canon MP638 Service Manual

2-3. Other Error Messages

Message on the LCD
The selected paper cannot be fed from
cassette. Change the paper source and
press [OK].
Cannot apply the following setting(s).
Change the setting(s).
Device memory is full. Cannot continue
process. Reduce the number of
documents (photos, etc.) to scan or
copy.
Press [Color].
Press [Black].
There are no photos in memory card.
The value exceeds the number of copies
you can print.
Memory card is not set. Insert the card
after checking the direction.
DPOF information is not saved.
The number of copies to print is not set.
Input the number of copies using [+]/[-
].
This layout is available only for A4 or
8.5"x11"(215x279).
Cannot specify "stickers" and "half-side
layout" together. Check markings on
handwriting sheet.
Cannot print via wireless
communication.
- No photo data
- Unsupported photo data
- Photo data too large
Change the setting after removing the
card.
The card is currently writable from PC.
Set to [Not writable from PC].
Cause
The paper type being used is not supported for
paper feeding from the cassette.
Settings made conflict each other. (e.g.
Selecting borderless printing on plain paper)
The memory is not sufficient to do the print
job in copying.
The Black button was pressed, but it is invalid. A temporary error. Press the Color button to
The Color button was pressed, but it is invalid. A temporary error. Press the Black button to
Supported image files are not in the memory
card.
During selecting images or specifying the
number of copies, the total print quantity
exceeds the prescribed value of 999.
The memory card is not inserted in the slot
properly.
DPOF print was selected in the menu, but no
DPOF files are contained in the memory card.
Printing was attempted with the print quantity
left "0" (zero).
In Layout print, "Mixed 1, 2, or 3" which is
available only with A4 or Letter size paper is
selected, but the paper size is not set to A4 or
Letter.
The selected layout on the handwriting sheet is
not supported for Stickers.
The received data via infrared communication
is not image data.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
With the memory card set to "Writable from
PC," Card Direct printing operation was
10 / 45
Solution
Change the paper source to the rear tray.
Change the settings so that they will not
conflict each other.
Reduce the amount of data to be printed, or
print from a computer.
continue the operation.
continue the operation.
A temporary error.
- Confirm that supported image files are in the
memory card.
- Images with double-byte characters used in
the file name (or folder name) may not be
recognized. Change the file (or folder) name
so that it contains only single-byte
alphanumeric characters.
- If images are edited on the computer, print
them from the computer.
A temporary error. The last operation before
the error is cancelled, and the total print
quantity returns to the value before the error.
Set a memory card properly.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
A temporary error. Specify the print quantity.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
A temporary error. Press the OK button to
clear the error. The LCD returns to the display
before the error occurrence.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
A temporary error. Remove the memory card,
then change the Read/Write attribute.
A temporary error. Remove the memory card,
change the memory card setting to Read-only,