3.2.12. Out-Profile Action Config
Select "Advanced Config," and then "Out-Profile Action Config" to open the
screen shown in Figure 3-37. On this screen, you can configure the out-profile
settings.
Screen Description
Total Entry
Displays the number of created Out-profiles (number of indexes) .
ID
Displays the index number of an Out-profile.
Behavior
Displays whether to deny or permit packets.
Deny
Permit
C o m m i t t e d
Displays the rate at which a packet enters the buffer.
Rate
Burst Size
Indicates the burst size of traffic that can be sent exceeding the commit rate. The
following options are used: "4KB," "8KB," "16KB," "32KB," and "64KB."
Figure 3-37 Out-Profile Action Config
Denies packets.
Permits packets.
64