Table of Contents
Advertisement
2 CONTROL
2-1 On and Off
(1) Press the [On/Off] button.
Mode
Set Temp.
26.0
26.0
Cool
On/Off button
The LED lamp remains lit while the indoor unit is operat-
ing.
Note
The On/OFF button cannot be operated at screens other
than the monitor mode screen.
2-2 Operation Settings
2-2-1 Set the Operation Mode
(1) Touch the [Mode] on the monitor mode screen.
(2) "Mode" screen is displayed. Select the operation mode.
(1)
Mode
Set Temp.
26.0
26.0
Cool
°C °C
Status
Depending on the model of
the indoor unit, [Custom Auto]
is displayed instead of [Auto].
Notes
• Only selectable modes are displayed. The selectable
modes may be different depending on the system con-
figuration and operation status. Refer to "4-1 Selectable
modes" in the OPERATING MANUAL on the CD-ROM.
• When the "Fan" is selected, the
temperature cannot be set.
• [Auto] or [Custom Auto] mode can be used in the R.C.
Group to which Master Indoor Unit is set. It is not dis-
played at other R.C. Group.
• When the operation mode is switched in a heat recovery
system, operation preparations may take some time, but
this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
En-3
Fri 10:00AM
Fan
Auto
°C °C
LED lamp
Status
Menu
(2)
Mode
Fri 10:00AM
Fan
Cool
Dry
Auto
Auto
Fan
Cancel
Menu
Mode
Set Te
Dry
26.0
26.
Custom
Auto
Fan
Mode
Set Temp.
Fan
2-2-2 Set the Temperature
(1) Touch the [Set Temp.] on the monitor mode screen.
(2) "Set Temp." screen is displayed. Adjust the room tem-
perature with the [ ] or [ ].
(1)
Mode
Cool
When the operation mode is
set to [Custom Auto], set the
cooling and heating tempera-
ture.
Notes
• The settable temperature range is different depending
on the operation mode. Refer to "4-3 Selectable Tem-
perature Range" in the OPERATING MANUAL on the
CD-ROM.
• When the "Set Temp. Range Setting" is set, the select-
able temperature conforms to the setting. Refer to "3-6-3
Set Temp. Range Setting" in the OPERATING MANUAL
on the CD-ROM.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-3 Set the Fan Speed
(1) Touch the [Fan] on the monitor mode screen.
Heat
(2) "Fan" screen is displayed. Select the fan speed with the
[ ] or [ ].
(1)
OK
Mode
Cool
Heat
°C
Custom
Auto
OK
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
Fri 10:00AM
Fan
Auto
Status
Menu
(2)
Set Temp.
Fri 10:00AM
Set Temp.
Fan
26.0
26.0
26.0
26.0
Auto
°C °C
Status
Menu
Set Temp.
(2)
Fan
Fri 10:00AM
Set Temp.
Fan
26.0
26.0
Auto
°C °C
Status
Menu
°C °C
Cancel
OK
Cool
Heat
28.0
20.0
°C
°C
Cancel
OK
Auto
Cancel
OK
Advertisement
Table of Contents
