D-Link DCS-8515LH User Manual page 15

Section 2: Installation
Step 3:
in the top-left corner, select Add New
After logging in, tap the Menu icon
Device and follow the on-screen instructions to connect to your camera.
Bluetooth needs to be enabled on your phone.
Step 4:
When you are asked to scan a QR code, select Yes or No.
If you selected Yes:
Scan the QR code on the bottom of the the camera, then press Next.
If you selected No:
Select the DCS-8515LH camera from the list, then press Next.
Select Next and continue to follow the onscreen instructions.
Final Step:
Congratulations, your HD Pan & Tilt Wi-Fi Camera is now ready to use!
Be sure to check the www.mydlink.com website periodically for the latest
firmware updates to keep your product secure and up to date with the latest
features.
Note: If you experience issues registering this camera with your mydlink account, or if you
purchased an open box or resold unit, perform a hard reset by pressing and holding the
recessed reset button on the camera for 10 seconds while the device is powered on, making
sure that you see the LEDs turn off.
D-Link DCS-8515LH User Manual 12