Table of Contents
Advertisement
14
www.aeg.com
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the cooking
zone with
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
To deactivate the function you can also
touch
and
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer.
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between
counted time (minutes).
To see how long the cooking zone
operates: set the cooking zone with
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates.
. The indicator of
. Touch
or
.
and touch
at the same time.
.
comes on. When the
and
To deactivate the function: set the
cooking zone with
. The indicator of the cooking zone
goes out.
Minute Minder
You can use this function as a Minute
of
Minder when the hob is activated and
the cooking zones do not operate. The
heat setting display shows
To activate the function: touch
Touch
time. Cooking zones display deactivates
automatically after 10 seconds. When the
time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch
To deactivate the function: activate for
a short time and deactivate left front
. The
cooking zone.
The function has no effect
on the operation of the
cooking zones.
6.9 Lock
You can lock the sensors on the hob
while cooking zones operate.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
of
function.
6.10 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: the hob must
.
be deactivated. Touch
until
flashes. Touch
for 4 seconds.
and touch
.
or
of the timer to set the
.
for 4 seconds
.
or
.
.
.
comes on
Advertisement
Table of Contents
