IPv6 configuration
When you install the printer driver, do not configure both IPv4 and IPv6. We
recommend to configure either IPv4 or IPv6.
DHCPv6 address configuration
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
• Accessing menus may differ from model to model (see "Menu overview"
on page 32).
• It may be necessary to press
some models.
OK
to navigate to lower-level menus for
1
Select
(Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on
the control panel.
OR
For the model with a touch screen, select
> Next > Network Setup > TCP/IP (IPv6) > DHCPv6 Config on the
touch screen
Press OK to select the required value you want.
2
For the model with a touch screen, select the option you want using
arrows and press
(back) to save the selection.
•
Router: Use DHCPv6 only when requested by a router.
•
Always Use: Always use DHCPv6 regardless of router request.
•
Never Use: Never use DHCPv6 regardless of router request.
(Setup) > Machine Setup
2. Using a Network-Connected Machine
188