Program Fm Radio Stations Manually; Select A Preset Radio Station; Show Rds Information; Select Stereo/Mono Broadcast - Philips DCM2055/12 User Manual

Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press / repeatedly to select a channel
number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.

Select a preset radio station

In tuner mode, press
buttons to select a preset radio station.

Show RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon is displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Program service
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text message
» Time
12 EN
/ or the numeric

Select stereo/mono broadcast

Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.