Glossary; Maintenance - Philips 65PFL6601 User Manual

65PFL6601 serial numbers beginning with DS4A1702 or lower numbers / 75PFL6601 serial numbers beginning with GZ1
6 Information

Glossary

Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the
name of analog broadcasting standards.
Off the air analog TV signals are no longer being sent by major broadcasting
stations in the USA.
ARC (Audio Return Channel) (HDMI 1 only)
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to
a connected audio device, without the need for an additional digital audio
cable. Be sure that the device is HDMI CEC and ARC compliant, and that the
TV is connected to the device using an HDMI cable attached to both HDMI-
ARC connectors.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in
other words, the TV screen is almost square); widescreen models are 16:9 (the
TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices
with CEC feature and this unit. We do not guarantee 100% interoperability with
other brands of CEC compliant devices.
Component video
This is a Video signal format that conveys each of 3 principal colors of light
(red, blue and green) through different signal lines. This allows the viewers to
experience picture colors as original as it is. There are several signal formats,
including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress digital sound. It
offers stereo sound (2ch) or multi-channel audio.
DTV (ATSC)
Abbreviation that stands for Advanced Television Systems Committee and
the name of the digital broadcasting standards.
E-sticker
E-sticker is showing set features, technical information, etc on this TV set that
is displayed on the TV screen mainly used by TV retailers. Previously the
information was on a printed sticker that was put on the display.
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, digital audio / video formats
including set-top box, Blu-ray / DVD recorder or digital television, over a single
cable.
HDR
HDR stands for High Dynamic Range. By using additional data encoded with
the source signal, HDR capable products offer greater contrast through an
expansion of the range of the image's color luminance. The source, cable and
display must all support HDR.
HDTV (High-Definition TV)
Ultimate digital format that produces high resolution and high picture quality.
PIN code
A stored 4-digit number that allows access to parental control features.
SAP (Secondary Audio Program)
Second-audio channel delivered separately from the Main-audio channel.
This audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard digital format that is similar to the analog TV picture quality.
Sonic Emotion Premium
Sonic Emotion Premium fills your surroundings with the right ambience,
clarifies voice, and details the sound stage, making your experience more
immersive and enjoyable.

Maintenance

Cleaning
•
Clean the front panel and other exterior surfaces of the unit with a soft
microfiber cloth or lens brush. Before cleaning the panel, disconnect the
AC power cord.
•
Never use a solvent or alcohol. Do not spray insecticide liquid near the
unit. Such chemicals may cause damage and discoloration to the
exposed surfaces.
•
Do not spray any liquids on the screen or other exterior surfaces of this
unit. If liquids enter the unit, they could cause shorts, electric shocks or
fire damage.
Servicing
Should your unit become inoperative, do not try to correct the problem
yourself. There are no user serviceable parts inside. Call our toll free
customer support line found on the cover of this User manual to locate
an authorized service center.
IR signal check
If the remote control is not working properly, you can use a digital or cell
phone camera to see if it is sending out an infrared signal.
e.g.) With a digital camera:
Point the digital camera towards the remote
control infrared diode at the front of the
remote control. Press and hold any key on
the remote control and look at the camera
display. If an infrared pulsating light appears
on the display, the remote control is sending
out an IR signal.
Note: Some cameras may have an IR filter
or dual camera cell phones may have an IR filter in one of the camera's
and both will not display the IR signal.
55
.
English