Fig. 44: Installing The Cartridge Group; Table 38: Tightening Torque (51007) - ABB HT581373 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.14 Installing the cartridge group
Installing the cartridge group
Fig. 44: Installing the cartridge group
Part number
51007
Table 38: Tightening torque (51007)
1. Coat the threads of the studs (51006) with high-temperature grease.
2. Align the casing position of the cartridge group with the marking.
3. Lower the cartridge group into the turbine casing.
4. Remove ring nuts and screws.
5. Install the fastening strips (51002) with Verbus Ripp®discs (51003) and hexagon
nuts (51007).
6. Tighten the hexagon nuts (51007).
© Copyright 2018 ABB. All rights reserved.
A130
M8
25 Nm
HZTL4030_EN
A135
M10
45 Nm
Revision E
A140
M12
75 Nm
September 2018