VPN and Remote Access Setup
Profile Name
Enable this profile
Call Direction
Always on
Idle Timeout
Enable PING to
keep alive
PING to the IP
Specify a name for the remote network.
Check here to activate this profile
Specify the call direction for this profile. Both means it can be
used for outgoing and incoming access. Dial-Out means it can
only be used for outgoing access. Dial-In allows only incoming
access.
Click it to always activate this profile. The field of Idle Timeout
will be grayed to disallow any input.
By default, set as 300 seconds. If the profiles connection is idle
over the limitation of the timer, the router will drop the
connection.
Click this item to enable the transmission of PING packets to
an IP address defined in the field of "PING to the IP"
Specify the IP address of the remote host that located at the
other-end of the VPN tunnel.
8-12